A traditional large diameter pole, with hand-turned and hand-carved finials, for you to stain or paint to match your room.

• Finishes: The wood products in this section are supplied in untreated, solid wood and can be stained, varnished or painted by you to your own requirements.
• Delivery: Poles can only be sent to mainland UK addresses. Finials, bracket and rings can be sent to UK international addresses.
• Availability: Generally despatched in 1-2 weeks.

Choose Length: 120cm150cm180cm200cm240cm300cm (two halves)360cm (two halves)400cm (two halves)

• Diameter: 51mm (2"); length: 120cm - 400cm (can be cut to size); centre support recommendation: 225cm and over.
• Note: Pole only, please choose fixtures and accessories below. Due to length, poles can only be sent to mainland UK addresses.

Choose Length: 120cm150cm180cm200cm240cm300cm (two halves)360cm (two halves)400cm (two halves)

• Diameter: 51mm (2"); length: 120cm - 400cm (can be cut to size); centre support recommendation: 225cm and over.
• Note: Pole only, please choose fixtures and accessories below. Due to length, poles can only be sent to mainland UK addresses.

• A simple, classic ball finial; screws into end of 51mm pole.
• Length: 100mm (4"); width: 72mm (2 7/8").

• A ball finial with attractive ribbing around the centre; screws into end of 51mm pole.
• Length: 100mm (4"); width: 74mm (3").

• A classic fluted ball finial; screws into end of 51mm pole.
• Length: 125mm (5"); width: 80mm (3 1/8").

• An intricately carved wood finial; screws into end of 51mm pole.
• Length: 120mm (4 3/4"); width: 70mm (2 3/4").

• A classic wood finial; screws into end of 51mm pole.
• Length: 120mm (4 3/4"); width: 75mm (3").

• A wood finial in the shape of a stylised acorn; screws into end of 51mm pole.
• Length: 130mm (5 1/8"); width: 75mm (3").

• An intricately carved pineapple finial; screws into end of 51mm pole.
• Length: 135mm (5 1/4"); width: 70mm (2 3/4").

• An octagonal wood finial; screws into end of 51mm pole.
• Length: 140mm (5 1/2"); width: 75mm (3").

• A large wood finial in the shape of an old-fashioned lantern with beautiful ribbing around the centre; screws into end of 51mm pole.
• Length: 165mm (6 1/2"); width: 100mm (4").

• A hand-turned wood finial; screws into end of 51mm pole.
• Length: 155mm (6 1/8"); width: 80mm (3 1/8").

• A large wood finial; screws into end of 51mm pole.
• Length: 180mm (7"); width: 80mm (3 1/8").

• A wood finial in the shape of a classic urn; screws into end of 51mm pole.
• Length: 120mm (4 3/4"); width: 80mm (3 1/8").

• A classy carved wood finial; screws into end of 51mm pole.
• Length: 145mm (5 3/4"); width: 85mm (3 3/8").

• A stylish carved acorn finial; screws into end of 51mm pole.
• Length: 165mm (6 1/2"); width: 70mm (2 3/4").

• A solid beech wooden support bracket for a 51mm (2") pole. Pole secured by a nipping screw located on underside of cup. Bracket supplied with metal fixing plate.
• Can be used as central support for long poles.
• Three brackets recommended for pole lengths of 225cm and above.
• Base diameter: 72mm (2 7/8"); projection from wall to back of pole: 78mm (3").

• A classic solid brass end bracket, polished and lacquered, for a 51mm pole. Pole secured by turning of front rosette.
• Centre bracket recommended for pole lengths of 225cm and above.
• Length: 137mm (5 1/4"); width: 16mm (5/8); projection from wall to back of pole: 34mm (1 3/8").

• A solid brass centre bracket, polished and lacquered, to support the middle of long 51mm poles. Pole secured by turning of front rosette.
• Centre bracket recommended for pole lengths of 225cm and above.
• Length: 65mm (2 1/2"); width: 85mm (3 3/8"); projection from wall to back of pole: 34mm (1 3/8").

• A solid beech wooden 51mm recess bracket. Recess brackets are used to supporting a pole inside a window or from wall to wall without a finial.
• Centre bracket recommended for pole lengths of 225cm and above.
• Base diameter: 98mm (4").

• A solid beech wooden curtain ring for a 51mm (2") diameter pole.
• It is recommended that you use 1 ring per 10cm of pole, e.g. for a 300cm pole, you would need 30 rings.
• Inner diameter: 67mm (2 5/8"); outer diameter: 95mm (3 3/4").