A traditional pole, with hand-turned and hand-carved finials, for you to stain or paint to match your room.

• Finishes: The wood products in this section are supplied in untreated, solid wood and can be stained, varnished or painted by you to your own requirements.
• Delivery: Poles can only be sent to mainland UK addresses. Finials, brackets and rings can be sent to UK and international addresses.
• Availability: Generally despatched in 1-2 weeks.

Choose Length: 120cm150cm180cm200cm240cm300cm (two halves)360cm (two halves)

• Diameter: 38mm (1 1/2"); length: 120cm - 360cm (can be cut to size).
• Note: Pole only, please choose fixtures and accessories below. Due to length, poles can only be sent to mainland UK addresses.

Choose Length: 120cm150cm180cm200cm240cm300cm (two halves)360cm (two halves)

• Diameter: 38mm (1 1/2"); length: 120cm - 360cm (can be cut to size).
• Note: Pole only, please choose fixtures and accessories below. Due to length, poles can only be sent to mainland UK addresses.

• A simple, classic ball finial; screws into end of 38mm pole.
• Length: 78mm (3"); width: 60mm (2 3/8").

• A ball finial with attractive ribbing around the centre; screws into end of 38mm pole.
• Length: 80mm (3 1/8"); width: 60mm (2 3/8").

• A classic fluted ball finial; screws into end of 38mm pole.
• Length: 100mm (4"); width: 60mm (2 3/8").

• A classic wood finial; screws into end of 38mm pole.
• Length: 95mm (3 3/4"); width: 60mm (2 3/8").

• A wood finial in the shape of a stylised acorn; screws into end of 38mm pole.
• Length: 115mm (4 1/2"); width: 65mm (2 1/2").

• An intricately carved pineapple finial; screws into end of 38mm pole.
• Length: 130mm (5 1/8"); width: 60mm (2 3/8").

• An octagonal wood finial; screws into end of 38mm pole.
• Length: 120mm (4 3/4"); width: 57mm (2 1/4").

• A wood finial in the shape of an old-fashioned lantern; screws into end of 38mm pole.
• Length: 145mm (5 3/4"); width: 75mm (3").

• A wood finial in the shape of a classic urn; screws into end of 38mm pole.
• Length: 95mm (3 3/4"); width: 65mm (2 1/2").

• A solid beech wooden support bracket for you to paint or stain. Supplied with metal fixing plate. Pole retained by small nipping screw in underside of bracket.
• Can be used as central support for long poles.
• Three brackets recommended for pole lengths of 200cm and above.
• Base diameter: 75mm (3"); projection from wall to back of pole: 65mm (2 1/2").

• A classic solid brass end bracket, polished and lacquered, for a 38mm pole. Pole secured by turning of front rosette.
• Centre bracket recommended on poles 200cm long and over.
• Length: 135mm (5 1/4"); width: 16mm (5/8); projection from wall to back of pole: 39mm (1 1/2").

• A solid brass centre bracket, polished and lacquered, to support the middle of a long 38mm pole. Pole secured by turning of front rosette.
• Centre bracket recommended on poles 200cm long and over.
• Width: 85mm (3 3/8"); length: 45mm (1 3/4"); projection from wall to back of pole: 39mm (1 1/2").

• A solid beech wooden 38mm recess bracket. Recess brackets are used to support a pole inside a window or from wall to wall without a finial. Supplied with metal fixing plate.
• Centre bracket recommended for pole lengths of 200cm and above.
• Base diameter: 77mm (3").

• A wooden curtain ring for a 38mm pole.
• It is recommended that you use 1 ring per 10cm of pole, e.g. for a 300cm pole, you would need 30 rings.
• Inner diameter: 51mm (2"); outer diameter: 75mm (3").