The baypole is specially designed for bay windows or L-shaped corner windows and features corner hinges/elbows - with the products on this page you can customise a pole to fit your bay window. The baypole hinges are compatible with other 35mm diameter wood curtain poles.

• Finishes: Natural, teak, walnut and black.
• Delivery: Poles can only be sent to mainland UK addresses. Hinges, finials, brackets and rings can be sent to UK and international addresses.
• Availability: Generally despatched in 1-2 weeks.
• Note: Click here for instructions on fitting a Baypole. Maximum recommended length of pole is 360cm. Three brackets should be used in all bay windows. We only recommend the baypole for windows with 1 or 2 'bends', i.e. L-shaped, square or splay bay windows.

Choose Length120cm150cm180cm210cm240cm300cm (two halves)360cm (two halves) Choose FinishNaturalTeakWalnutBlack

*poles supplied in 2 halves with joining screw - a central support is required (not included, choose below).

• A brassed corner hinge fitting for 35mm (1 3/8") diameter wooden curtain poles only.
• Slot the poles into the hinge and rotate the hinge arms between 90 - 180 degrees to match the angle of your bay window.
• Instructions for fitting a Baypole

Choose Finish: NaturalTeakWalnutBlack

• A wood finial in 4 finishes
• Length: 100mm (4"); width: 60mm (2 3/8").

• A brassed bracket for 35mm poles to match the corner hinges. Can be wall or top (ceiling) fixed.
• Projection from wall to rear of pole: 72mm (2 7/8"); base plate: 100mm (4") x 58cm (2 1/4").

Choose Finish: NaturalTeakWalnutBlack

• A pack of 6 wooden curtain rings in 4 finishes for a 35mm pole.
• It is recommended that you use 1 ring per 10cm of pole, e.g. for a 240cm pole, you would need 24 rings.
• Inner diameter: 51mm (2"); outer diameter: 70mm (2 3/4").

Choose Finish: NaturalTeakWalnut

• A wood holdback in 3 finishes.
• Diameter: 65mm (2 1/2"); projection: 155mm (6").